Setting The Temperature - Mercedes-Benz 2012 E-Class Sedan Operator's Manual

Operating the climate control system
136
Adjusting the climate mode settings
(AIR FLOW)
This function is only available with 3-zone
automatic climate control.
The climate mode settings are especially
effective at high temperatures.
You can select the following climate mode
settings in automatic mode:
FOCUS high airflow that is set slightly
cooler
MEDIUM medium airflow, standard setting
DIFFUSE low airflow that is set slightly
warmer and with less draft
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Press the à button.
X
Press button G up or down and select the
desired level (

Setting the temperature

2-zone automatic climate control
Different temperatures can be set for the
driver's and front-passenger sides.
X
Turn the SmartKey to position 2 in the
ignition lock.
X
To increase/reduce: press button E or
H up or down (
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
Y
page 133)
Y page 131).
3-zone automatic climate control
Automatic climate control climate zones
You can select different temperature settings
for the driver's and front-passenger sides as
well as for the rear compartment.
X
Turn the SmartKey to position 2 in the
ignition lock.
X
To increase/reduce the temperature in
the front compartment: press button F
or J up or down (
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
X
To increase/reduce the temperature in
the rear compartment using the front
control panel: press the á button.
The indicator lamp above the á button
goes out.
X
Press button F or J up or down
( Y page 133).
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
X
To increase/reduce the temperature in
the rear compartment using the rear
control panel: press button K or
Y page 133).
O(
Only change the temperature setting in
small increments. Start at 72 ‡ (22 †).
I n f o r m a t i o n P r o v i d e d b y :
Y page 133).