Calling Up - Mercedes-Benz 2012 E-Class Sedan Operator's Manual

X
Turn the SmartKey to position 2 in the
ignition lock.
X
Press transmitter button ;, = or ? in the
overhead control panel that you have
programmed to operate the garage door.
Garage door system with a fixed code:
indicator lamp : lights up green.
Garage door system with a rolling code:
indicator lamp : flashes green.
i The transmitter will transmit a signal for
as long as the transmitter button is being
pressed. After a maximum of ten seconds,
transmission is terminated and indicator
lamp : flashes yellow. Press the
transmitter button again, if necessary.
Clearing the memory of the integrated
garage door opener on the rear-view
mirror
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Press transmitter buttons ; and ?.
The indicator lamp lights up yellow.
X
Press and hold transmitter buttons ;
and ? until the indicator lamp turns green.
i Make sure that you clear the memory of
the integrated garage door opener before
selling the vehicle.
Compass
Calling up the compass
To obtain a correct display in rear-view
mirror :, the compass must be calibrated
and the magnetic field zone must be set.
X
Press button = briefly.
The compass shows which direction the
vehicle is currently traveling in: N, NE, E, SE,
S, SW, W or NW.
Setting the compass
X
Determine your position using the following
zone maps.
North America zone map
South America zone map
I n f o r m a t i o n P r o v i d e d b y :
Features
305
Z