Display Message - Mercedes-Benz 2012 E-Class Sedan Operator's Manual

Display messages
b
Malfunction See
Operator's Manual
b
AUTO Lamp Function
Inoperative
b
Switch Off Lights
Adaptive Highbeam
Assist Inoperative
Adaptive Highbeam
Assist Currently
Unavailable See
Operator's Manual
Engine
Display messages
+
Check Coolant
Level See
Operator's Manual
G
WARNING
Do not spill antifreeze on hot engine parts. Antifreeze contains ethylene glycol which may burn
if it comes into contact with hot engine parts. You could be seriously burned.
Possible causes/consequences and M Solutions
The exterior lighting is defective.
X
Visit a qualified specialist workshop.
The light sensor is defective.
X
Visit a qualified specialist workshop.
The lights are still switched on when you leave the vehicle. A
warning tone also sounds.
X
Turn the light switch to c or Ã.
Adaptive Highbeam Assist is defective.
X
Visit a qualified specialist workshop.
Adaptive Highbeam Assist is deactivated and temporarily
inoperative, if:
the windshield is dirty in the camera's field of vision.
R
visibility is impaired due to heavy rain, snow or fog.
R
X
Clean the windshield.
Adaptive Highbeam Assist is available again, if:
the dirt (e.g. slush) drops away while the vehicle is in motion.
R
the system recognizes that the camera is fully operational again.
R
The display message
Available
is shown.
Possible causes/consequences and M Solutions
The coolant level is too low.
X
Add coolant, observing the warning notes when doing so
( Y page 311).
X
If coolant needs to be added more often than usual, have the
engine coolant system checked at a qualified specialist
workshop.
I n f o r m a t i o n P r o v i d e d b y :
Display messages
Adaptive Highbeam Assist Now
245
Z