Important Safety Notes - Mercedes-Benz 2012 E-Class Sedan Operator's Manual

Features
296
If indicator lamp ; does not light up,
consult the section on malfunctions.
X
To turn off: disconnect the plug from 115 V
power socket :.
Ensure that you do not pull on the cord.
X
Close flap =.
Possible causes of malfunction:
the on-board power supply is not within a
R
permissible volt range.
the temperature of the DC/AC converter is
R
temporarily too high.
some small electronic devices have a
R
constant nominal power of less than
150 W, but a very high inrush current.
These devices will not work. If you connect
such a device, 115 V power socket : will
not supply it with power.
If indicator lamp ; still does not light up,
contact a specialist workshop, e.g. an
authorized Mercedes-Benz Center.
mbrace

Important safety notes

! A license agreement must exist in order
to activate the mbrace service. Ensure that
your system is activated and ready for use,
and press the ï MB Info call button to
register. If any of the steps mentioned is
not carried out, the system may not be
activated.
If you have questions about the activation,
contact one of the following telephone
assistance services:
USA: Mercedes-Benz Customer
R
Assistance Center under
1-800-FOR-MERCedes
(1-800-367-6372) or 1-888-990-9007
Canada: Customer Service at
R
1-888-923-8367
24 USA only.
25 USA only.
Shortly after successfully registering with the
mbrace service, a user ID and password will
be sent to you by post. You can use this
password to log in to the mbrace section
under "Owners Online" at http://
www.mbusa.com
The mbrace system is available if:
it has been activated and is operational.
R
the corresponding mobile phone network
R
is available for transmitting data to the
Customer Center.
a service subscription is available.
R
the starter battery is sufficiently charged.
R
i Determining the location of the vehicle on
a map is only possible if there is sufficient
GPS reception and the vehicle position can
be forwarded to the Customer Center.
The mbrace system
The mbrace system provides different
services, e.g.:
automatic and manual emergency call
R
Roadside Assistance call
R
MB Info call
R
To adjust the volume during an mbrace call,
proceed as follows:
X
Press the W or X button on the
multifunction steering wheel.
or
X
Use the volume controller of COMAND.
You can find further information and a
description of all available features under
"Owners Online" at http://
www.mbusa.com
System self-test
After you have switched on the ignition, the
system carries out a self-diagnosis.
I n f o r m a t i o n P r o v i d e d b y :
24
.
25
.