Table of Contents
Advertisement
Controls in detail
Control system
Vehicle status message memory menu
Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the sys-
tem. Such messages appear in the multi-
function display and are based on
conditions or system status the vehicle's
system has recorded.
The vehicle status message memory menu
only appears, if messages have been
stored.
152
Warning!
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner's
and/or driver's responsibility to maintain
the vehicle's operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages ( page 347).
Press button è or ÿ repeatedly
until the vehicle status message mem-
ory menu appears in the multifunction
display.
If the vehicle status message memory
menu does not appear, no messages
have been stored.
If conditions have occurred causing status
G
messages to be recorded, the number of
messages appears in the right multifunc-
tion display:
1 Number of recorded status messages
Press button k or j.
The stored messages will now be dis-
played in the order in which they have
occurred. For malfunction and warning
messages, see "Vehicle status messag-
es in the multifunction display"
( page 347).
i
After you have scrolled through all recorded
status messages, the first recorded message ap-
pears again.
Advertisement
Table of Contents
