Practical hints
Replacing wiper blades
Vehicles with KEYLESS-GO*
Turn off the engine ( page 62).
With the driver's door closed, the start-
er switch is now in position 1.
Turn combination switch to wiper
setting II ( page 57).
With wiper arms in the vertical position,
open the driver's door.
The starter switch is set to position 0,
same as SmartKey removed from start-
er switch.
Turn combination switch to wiper
setting 0 ( page 57).
404
Removing wiper blades
Fold the wiper arm forward until it
snaps into place.
!
Do not pull on the wiper blade inserts. They
could tear.
Turn wiper blade at a right angle to the
wiper arm.
Slide the wiper blade sideways out of
the retainer.
Installing wiper blades
Slide the wiper blade onto the wiper
arm in opposite direction of arrow.
Rotate the wiper blade into a position
parallel to the wiper arm.
Fold the wiper arm backward to rest on
the windshield. Make sure you hold on
to the wiper when folding the wiper arm
back.