Table of Contents
Advertisement
Controls in detail
Automatic transmission
Activating manual shift program
Press program mode selector
switch 1 repeatedly until the
MANUAL program mode appears in
the right multifunction display.
The transmission switches to the
MANUAL program mode. Automatic
shifting is switched off. The gear range
is not limited.
You can change the gears manually when
the gear selector lever is in position D. You
can upshift or downshift through the gears
in succession.
i
The MANUAL program mode will not be
stored. When the engine is turned off with the
MANUAL program mode selected, the transmis-
sion will go to the automatic program mode
(C or S) when the engine is restarted.
178
Upshifting
!
In the MANUAL program mode, the trans-
M
for
mission will not upshift, even if the engine has
reached its overrevving range. Shift up to the
next gear before the engine has reached its over-
revving range. Make absolutely certain that the
engine speed does not reach the red marking on
the tachometer ( page 26). Otherwise the en-
gine could be damaged which is not covered by
the Mercedes-Benz Limited Warranty.
Briefly press the gear selector lever to
the right in the D+ direction.
or
Briefly pull right shift paddle 2
( page 175).
The transmission shifts to the next
higher gear.
If, instead of the manual program mode
, the symbol p appears in the
symbol
M
right multifunction display ( page 169),
shift to the next higher gear. The fuel
supply will otherwise be interrupted to
prevent the engine from overrevving.
i
If you have selected the AMG menu in the
control system and the engine reaches the over-
speed range in the manual shift program, the col-
or of the display will switch to red and
appears after the gear indicator, advising you to
upshift.
UP
Advertisement
Table of Contents
