Table of Contents
Advertisement
Lighting submenu
Access the
Lighting
submenu via the
Settings
menu. Use the
Lighting
menu to change the lamp and lighting set-
tings on your vehicle. The following
functions are available:
Function
Setting daytime running lamp
mode (USA only)
Setting locator lighting
Setting night security illumina-
tion
Setting interior lighting delayed
switch-off
Setting daytime running lamp mode
(USA only)
sub-
i
This function is not available in countries
where the daytime running lamp mode is manda-
tory and therefore in a constant mode.
Move the selection marker with button
æ or ç to the
Page
menu.
159
Press button j or k repeatedly
until the message
160
Headlamp mode
160
function display.
The selection marker is on the current
161
setting.
Press button æ or ç to select
manual operation (
running lamp mode (
With daytime running lamp mode activated
and the exterior lamp switch at
position M or U the low beam head-
lamps are switched on when the engine is
running.
In low ambient light conditions the follow-
ing lamps will switch on additionally:
Lighting
sub-
Light circuit
appears in the multi-
i
tings ( page 153) while driving will not deacti-
vate the daytime running lamp mode.
The following message appears in the multifunc-
tion display: Cannot be fully reset to
factory settings when driving.
Manual
) or daytime
Constant
).
Controls in detail
Control system
Parking lamps
Tail lamps
License plate lamps
Side marker lamps
For safety reasons, resetting to factory set-
159
Advertisement
Table of Contents
