PREVENTING THE TV FROM FALLING OVER
PREVENTING THE TV FROM FALLING OVER
Carry out the steps given below to stabilize the TV that it will be safe in the event of a disaster such as an earthquake, and
so that it will not fall over during normal use.
Use the marketed bands and screws to fasten the TV securely to the TV stand etc.
TV Stand etc.
CONNECTING LCD TV
This LCD TV uses nominal input voltages of 100-242V AC. It
is designed to work with single-phase power systems having a
grounded neutral conductor. To reduce risk of electrical shock,
do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not
sure of the type of power being supplied.
Connect the LCD TV with all peripheral equipment before
turning the LCD TV on.
CAUTION
For safety, unplug AC power cord when the
LCD TV is not in use.
When this LCD TV is connected to an outlet with AC
power cord, it is in Stand-by mode and consumes a
little electric power.
Mounting screw
(Not supplied)
Band
(Not supplied)
CONNECTING THE AC POWER CORD
AC Power Cord
To the AC Outlet (100 - 242V AC)
Pulls the AC power cord out from the
LCD TV. The AC outlet must be near this
equipment and must be easily accessible.
7