Tuner - Sanyo LCD-32CA8Z Owner's Manual

MENU OPERATION
1
Press MENU button and the main menu will appear. Press
2
Press VOLUME(+/-) buttons to enter into Tuner menu. (Whenever
this menu is accessed initially, Auto Search will be the default
selection.)
3
desired.
4
Press VOLUME(+/-) buttons to adjust the item.
Press BACK button to return to the previous menu.
Press MENU button or wait for 5~60 seconds (refer to "Duration" on
page 33) to exit menu operation.
Note:
the main picture is TV mode .
Auto Search
All receivable channels are automatically tuned in and memorized in
consecutive programme position.
pressing MENU button.
will automatically return to programme position "1".
Semi-Auto Search
Use to preset a receivable channel in any desired programme position,
e.g. the position with the same number as the channel.
1
Select channel "6".
2
Enter into "Tuner" menu, pressing the CHANNEL UP/DOWN
3
Press VOLUME(+/-) buttons to start the channel searching.
The VOLUME(+) button will move tuning toward the higher
frequencies, and the VOLUME(-) button will move tuning toward the
lower frequencies.
Press and release the VOLUME(+) or (-) button to search for
required TV station. Once a station is located, tuning will automatically
stop. Continue till desired channel is located.
Press BACK button to return to the previous menu.
Press MENU button to exit menu operation.
30

TUNER

MAIN MENU(TUNER MENU)
Picture
Auto Search
>>>
Semi-Auto Search
>>>
Sound
Manual Search >>>
Tuner
Color System
Sound System
Time
Skip
Setup
Channel Swap
•••
PC Adj.
Adjust
Select Return
BACK
Picture
Auto Search
>>>
Semi-Auto Search
>>>
Sound
Manual Search >>>
Tuner
Color System
Sound System
Time
Skip
Setup
Channel Swap •••
PC Adj.
Adjust
Return
Select
BACK
AUTO SEARCH MENU
Auto Secrching
Please Wait...
1
Search Return Exit
BACK MENU
SEMI-AUTO SEARCH MENU
Semi-Auto Searching
Please Wait...
1
Search Return Exit
BACK MENU
Exit
MENU
Exit
MENU