Sanyo LCD-32CA8Z Owner's Manual page 31

Manual Search
Manually tune a channel if it cannot be automatically tuned, such as
when the signal is poor.
1
Select channel "6".
2
3
Press VOLUME(+/-) buttons to start the channel searching.
The VOLUME(+) button will move tuning toward the higher
frequencies, and the VOLUME(-) button will move tuning toward the
lower frequencies.
Press and hold the VOLUME(+) or (-) button to search for required
TV station.
Press BACK button to return to the previous menu.
Press MENU button to exit menu operation.
Color System
Select "AUTO" , "PAL", "SECAM" ,"NTSC" or "NTSC4.43" by pressing
VOLUME(+/-) buttons.
Sound System
When the clear sound could not be obtained, select "AUTO", "B/G",
"D/K", "I" or "M" by pressing VOLUME(+/-) buttons.
Note:
You can also use the SOUND SYSTEM button to select suitable
sound system directly.
When the selecting sound system is AUTO, it will detect receiving
sound system automatically and may change the reception sound
system of this LCD TV.
If the selecting sound system is not suitable, the sound may lost from
the TV set. Selecting the suitable sound system may improve the
sound quality.
Skip
This feature is used to remove unwanted channels from the channel
scanning memory.
You can skip the unused or undesired channels when you are select-
ing a channel using CHANNEL UP/ DOWN (
For example, to skip Program "04" :
02 03 04
skip
1
Select channel "4".
2
Follow steps 1-2 on page 30 to enter into "Tuner" menu, pressing
3
Press VOLUME(+/-) buttons to select "On". (If you want to cancel
the skip channel, please select "Off".)
Press BACK button to return to the previous menu.
Press MENU button or wait for 5~60 seconds (refer to "Du-
ration" on page 33) to exit menu operation.
) buttons.
05
MENU OPERATION
MANUAL SEARCH MENU
Manual Search
1
Search Return Exit
BACK MENU
31