Olivetti d-Copia 284MF Service Manual page 82

2JN
Maintenance
item No.
Setting communication control 1
U630
Description
Makes settings for fax transmission regarding the communication.
Start
1. Press the start key.
3. Select the item to be set using the cursor up/down keys.
Display
TX SPEED
RX SPEED
TX ECHO
RX ECHO
Setting the communication starting speed
Sets the initial communication speed when starting transmission. When the destination unit has V.34 capabil-
ity, V.34 is selected for transmission, regardless of this setting.
1. Select the setting using the cursor up/down keys.
Display
14400bps/V17
9600bps/V29
4800bps/V27ter
2400bps/V27ter
Initial setting: 14400bps/V17
2. Press the start key. The setting is set.
Setting the reception speed
Sets the reception speed that the sender is informed of using the DIS or NSF signal. When the destination unit
has V.34 capability, V.34 is selected, regardless of the setting.
1. Select the setting using the cursor up/down keys.
Display
14400bps
9600bps
4800bps
2400bps
Initial setting: 14400bps
2. Press the start key. The setting is set.
Setting the waiting period to prevent echo problems at the sender
Sets the period before a DCS signal is sent after a DIS signal is received. Used when problems occur due to
echoes at the sender.
1. Select the setting using the cursor up/down keys.
Display
500
300
Initial setting: 300
2. Press the start key. The setting is set.
1-3-54
Description
Description
Sets the communication starting speed.
Sets the reception speed.
Sets the waiting period to prevent echo problems at the sender.
Sets the waiting period to prevent echo problems at the receiver.
Description
V.17, 14400 bps
V.17, 9600 bps
V.27ter, 4800 bps
V.27ter, 2400 bps
Description
V.17, V.33, V.29, V.27ter
V.29, V.27ter
V.27ter
V.27ter (fallback only)
Description
Sends a DCS 500 ms after receiving a DIS.
Sends a DCS 300 ms after receiving a DIS.
Service Manual Y111030-4