Self Diagnostic Codes - Olivetti d-Copia 284MF Service Manual

2JN

(2) Self diagnostic codes

Code
0030 FAX PWB system error
Processing with the fax software was
disabled due to a hardware problem.
0070 FAX PWB incompatible detection
Error
Abnormal detection of FAX PWB incom-
patibility In the initial communication with
the FAX PWB, any normal communica-
tion command is not transmitted.
0100 Backup memory device error
0120 MAC address data error
0130 Backup memory read/write error
0140 Backup memory data error
0150 Control PWB EEPROM error
Detecting control PWB EEPROM (U17)
communication error.
0170 Billing counting error
0180 Machine number mismatch
Machine number of main and engine
does not match.
1-4-4
Contents
Causes Check procedures/corrective measures
Defective FAX Replace the FAX PWB (See page 1-5-50).
PWB.
Defective fax soft- Install the fax software.
ware.
Defective FAX Replace the FAX PWB (See page 1-5-50).
PWB.
Defective flash Replace the control PWB (See page 1-5-
memory. 39).
Defective control Replace the control PWB (See page 1-5-
PWB. 39).
Defective flash Replace the control PWB (See page 1-5-
memory. 39).
Defective flash Replace the control PWB (See page 1-5-
memory. 39).
Defective control Replace the control PWB (See page 1-5-
PWB. 39).
Defective flash Replace the control PWB (See page 1-5-
memory. 39).
Defective control Replace the control PWB (See page 1-5-
PWB. 39).
Improper installa- Check the installation of the EEPROM (U17)
tion control PWB and remedy if necessary (See page 1-5-39).
EEPROM (U17).
Defective control Replace the control PWB (See page 1-5-
PWB. 39).
Data damage of Contact the Service Administrative Division.
control PWB
EEPROM (U17).
Defective control Replace the control PWB (See page 1-5-
PWB. 39).
Data damage of Contact the Service Administrative Division.
control PWB
EEPROM (U17).
Data damage of Contact the Service Administrative Division.
control PWB
EEPROM (U17).
Service Manual
Remarks
Y111030-4