Olivetti d-Copia 284MF Service Manual page 43

Maintenance
item No.
Adjusting the deflection in the paper
U051
Description
Adjusts the deflection in the paper.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Adjustment
1. Press the start key.
2. Select the item to be adjusted using the cursor up/down keys.
Display
DELAY BASE
REGIST CAS1
REGIST CAS2
REGIST CAS3
DUPLEX
3. Press the system menu/counter key.
4. Place an original and press the start key to make a test copy.
5. Press the system menu/counter key.
6. Change the setting value using the cursor left/right keys or numeric keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
7. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Y111030-4
Description
Description
Adjustment of deflection in the paper
Paper feed from cassette
Paper feed from optional cassette
Paper feed from optional cassette
Duplex mode (second side)
Original
Figure 1-3-3
Service Manual
Setting
range
-128 to 127
-128 to 127
-128 to 127
-128 to 127
-128 to 127
Copy Copy
example 1 example 2
Initial Change in
setting value per step
0 1 mm
0 1 mm
0 1 mm
0 1 mm
0 1 mm
1-3-15
2JN