Microlife WatchBP Home N Instruction Manual page 33

«Er 3» No pressure
in the cuff
«Er 5» Abnormal
result
An adequate pressure
cannot be generated in
the cuff. A leak may have
occurred. Replace the
batteries if necessary.
Repeat the measurement.
The measuring signals are
inaccurate and no result
can therefore be displayed.
Read through the checklist
for performing reliable
measurements and then
repeat the measurement.
«HI» Pulse or cuff
pressure too
high
«LO» Pulse too
low
The pressure in the cuff
is too high (over 300
mmHg) OR the pulse is
too high (over 200 beats
per minute). Relax for 5
minutes and repeat the
measurement.
The pulse is too low (less
than 40 beats per minute).
Repeat the measurement.
32 EN