Microlife WatchBP Home N Instruction Manual page 23

In «DIAG.» Mode
1) When the M button is pressed, it briefly displays the
total number of measurements stored, e.g. N=20.
«A» is displayed when
*
the number shown is
the average of all data.
«- -» will display when the
*
number of measurements
is less than 12.
2) Pressing the M button again displays the average of all
morning data.
3) Pressing M button once again shows the average of all
evening data.
* All individual readings can be viewed by repeatedly pressing
the M button.
22 EN