Removal Of Regulator Alone - Kirby Morgan 77 Operation And Maintenance Manual

Kirby Morgan 77
®
Remove the gasket for cleaning or replacement.
Note the ridge on the gasket. This ridge is designed
to help maintain the proper position of the gasket in
the groove in the pod.
Removal of the regulator mount nut.
98

7.8.2 Removal of Regulator Alone

In most circumstances, it is not essential to remove the
pod if you need to service the regulator. To remove
the regulator by itself, use the following procedure.
1) Remove the bent tube assembly. See the section in
this chapter for the proper procedure.
2) Remove the screws that secure the whisker to the
port. Take care not to lose the kidney plate, screws,
or whisker spacers.
Take care not to lose the whisker spacers.
3) Remove the oral nasal mask following the proce-
dure in this chapter.
4) Loosen the regulator mount nut. Note: The nut can-
not be removed with any of the regulator mounting
threads engaged. The regulator should be pulled from
the pod as the mount nut is being loosened.
5) Pull the regulator body away from the helmet.
© ⅯⅯⅩIⅡ Kirby Morgan Dive Systems, Inc. All rights reserved. Document # 130318003