Table of Contents
Advertisement
Some models may be equipped with multicontour seats.
These seats have inflatable air cushions built into the
backrests to provide additional lumbar and side support.
Turn the electronic key in starter switch to position 2 to
operate.
We recommend that you make the basic settings in the
following order:
1
Lumbar region
Press j or k to select a lumbar region.
Press and hold æ or ç to inflate or deflate the
selected lumbar support.
2
Center section
Press æ or ç side of switch and hold; the air
cushion will be inflated or deflated. Release the
switch in the desired position.
Seats
Instruments
Operation
and controls
Instrument
Driving
cluster display
3 Backrest side cushions
The lateral support increases or decreases as you
press the button to the right or left. Adjust the side
cushions to provide good lateral support.
4
Massage function (PULSE)
The multicontour backrest is equipped with a
massage function to help prevent fatigue during
longer journeys.
The PULSE function inflates and deflates the air
cushions in the lumbar region rhythmically.
An indicator lamp on the switch lights up when the
PULSE function is switched on. The PULSE function
switches off automatically after approximately
8 minutes.
75
Practical hints
Car care
Technical
Index
data
Advertisement
Table of Contents
