Table of Contents
Advertisement
Press the è or ÿ button repeatedly until the
individual setting preliminary display (1) appears.
Press the j or k button until the setting menu
"SETTINGS" (2) is displayed.
Pressing the æ or ç button controls the selection
marker (3) in setting menu (2).
"INSTRUMENT CLUSTER", see page 140.
"HEADLAMP MODE", see page 142.
"VEHICLE", see page 144.
Pressing the è or ÿ button displays the next or
previous system.
Notes:
These settings may only be performed with the vehicle
at standstill and with the electronic key in starter switch
position 1 or 2.
The individual setting preliminary display (1) will
appear if you speed up.
The setting menu previously called up will reappear
when the vehicle stops, providing no other system has
been called up in the meantime.
Multifunction steering wheel, multifunction display
Instruments
Operation
and controls
139
Instrument
Driving
cluster display
To return menu "SETTINGS" (2) to its factory
setting:
• Call up the individual setting preliminary
display (1).
• Press the J button in the instrument cluster for
approximately 3 seconds. Display (4) will appear.
• Press the J Button once more. The menu
"SETTINGS" is reset to factory settings,
acknowledged by display (5).
The individual setting preliminary display (1) will
appear if you do not press the J button within
about 5 seconds. The setting menus will not be
reset.
Practical hints
Car care
Technical
Index
data
Advertisement
Table of Contents
