Table of Contents
Advertisement
Instruments
Operation
and controls
Starting and turning off the engine
Turning off
Turning off the engine with electronic key:
Put the selector lever in position "P" and turn the
electronic key in the starter switch to position 0 to stop
the engine.
The electronic key can only be removed with the
selector lever in position "P".
Turning off the engine with KEYLESS-GO:
Stop the vehicle and put the selector lever in
position "P".
Press start-/stop button on the selector lever until the
engine stops. With the driver's door closed the starter
switch is set to the "On" position (starter switch
position 1). With the driver's door opened the starter
switch is set to the "Off" position (starter switch
position 0, same as electronic key removed from starter
switch).
Instrument
Driving
cluster display
228
Practical hints
Car care
Note:
The engine can only be turned off with selector lever in
position "P". If attempting to turn off the engine while
the selector lever is in any other position than "P" a
signal sounds and the message "SELECTOR LEVER
TO P" appears in the multifunction display as a
reminder to move the selector to position "P".
Technical
Index
data
Advertisement
Table of Contents
