Mercedes-Benz 2000 CL 500 Operator's Manual page 164

Mercedes-benz 2000 cl-class automobile operator's manual
Hide thumbs Also See for 2000 CL 500:
Table of Contents

Advertisement

6
6 Press switch briefly:
Single wipe without washer fluid
(select only if windshield is wet).
Push switch past resistance point:
Windshield washer system, windshield wipers.
See page 334 for instructions on filling the
windshield/headlamp washer reservoir.
7
Windshield wipers
Combination switch
Instruments
Operation
and controls
7
P54.25-2389-26
161
Instrument
Driving
cluster display
0 Off
I
Intermittent wiping
One initial wipe, pauses between wipes are
automatically controlled by a rain sensor
monitoring the wetness of the windshield. This
will not occur with a front door open.
Notes:
With switch in this position, one wipe occurs
when turning the electronic key in starter switch
from position 0. This will not occur with a front
door open.
Do not leave in intermittent setting when vehicle
is taken to an automatic car wash or during
windshield cleaning. Wipers will operate in
presence of water spray at windshield, and
wipers may be damaged as a result.
II Normal wiper speed
III Fast wiper speed
Practical hints
Car care
Technical
Index
data

Advertisement

Table of Contents
loading

This manual is also suitable for:

2000 cl 55 amg2000 cl 6002000 cl-classCl

Table of Contents