Table of Contents
Advertisement
Instruments
Operation
and controls
Memory function
Storing positions into memory
Driver's seat: with the electronic key in starter switch
position 1 or 2 or with the driver's door open and the
electronic key inserted in the starter switch.
Front passenger seat: with electronic key in starter
switch position 1 or 2 or the passenger door open.
Adjust the seat and multicontour backrest to the desired
position. You can also adjust the steering wheel, the
exterior mirrors electrically and the interior rear-view
mirror by hand for the driver's seat. See page 67 for
front seat adjustment, page 107 for exterior mirror
adjustment and page 105 for steering wheel adjustment.
Push memory button "M", release and push a stored
position button "1"," 2" or "3" within 3 seconds.
Instrument
Driving
cluster display
112
Practical hints
Car care
Recalling positions from memory
To recall a seat/head restraint/steering wheel/inside
rear view mirror and exterior rear view mirror position,
push and hold button "1", "2" or "3" until seat/head
restraint/steering wheel and exterior rear view mirror
movement has stopped.
The seat/head restraint/steering wheel/inside rear view
mirror and exterior rear view mirror movement stops
when the button is released.
Caution!
Do not operate the power seats using the memory
button if the backrest is in an excessively reclined
position. Doing so could cause damage to front or rear
seats.
First move backrest to an upright position.
Technical
Index
data
Advertisement
Table of Contents
