Table of Contents
Advertisement
"On" position (starter switch position 1, see page 222).
Most electrical consumers can be operated. For detailed
information see respective subjects.
Operation/driving position (starter switch position 2,
see page 222).
All electrical consumers can be operated. Gear selector
is unlocked.
"Off" position (electronic key removable from starter
switch).
Most electrical consumers cannot be operated.
The selector lever is locked in position "P".
Notes:
For improved recognition of the KEYLESS-GO-card the
doors should be closed when pressing the start-/stop
button.
The gear selector lever can only be moved with the
vehicle battery charged and connected, and the starter
switch in the Operation position. With the gear selector
lever in position "P", the brake pedal must also be
depressed.
Starter switch — KEYLESS-GO
Instruments
Operation
and controls
225
Instrument
Driving
cluster display
Important!
For the KEYLESS-GO-system to function properly, the
operator should observe the following:
• If the KEYLESS-GO-card is positioned farther away
from the vehicle (e.g. inside clothing or a briefcase),
the vehicle cannot be locked (see page 40) or started
with the start-/stop button (see page 227).
• If the KEYLESS-GO-card is removed from the vehicle
while the engine is running, or by placing the card
in front of the center armrest (see page 190), the
message "CHIP-CARD – NOT RECOGNIZED!" will
appear repeatedly while driving in the
multifunction display, see page 38.
Practical hints
Car care
Technical
Index
data
Advertisement
Table of Contents
