Table of Contents
Advertisement
Instruments
Operation
and controls
Engine oil level indicator
Engine oil level indicator
To check the engine oil level, park vehicle on level
ground, with engine at normal operational temperature.
Check oil level approximately 5 minutes after stopping
the engine, allowing for the oil to return to the oil pan.
The message "PERF. SERV. ON TIME" (perform service
[engine oil level check] on time) will be displayed if the
required waiting period has not been observed after
stopping the engine:
• with engine at operational temperature approx.
5 minutes.
Instrument
Driving
cluster display
154
Practical hints
Car care
• with engine not at operational temperature up to
approx. 30 minutes.
The engine oil level check can be repeated after a short
time.
Turn the electronic key in starter switch to position 2.
To call up the trip odometer and main odometer, press
button è or ÿ on the multifunction steering
wheel until the display appears. See page 124.
Press button j or k on the multifunction
steering wheel repeatedly until the "WHEN
MEASURING – CAR MUST BE LEVEL" engine oil level
indicator appears. This indicator is only a reminder.
Measurement can be cancelled by pressing button j
or k if the vehicle is not parked on level ground. An
incorrect reading will be recorded if you do not cancel
the measurement. Move the vehicle to level ground and
measure again.
The electronic key in starter switch is not in position 2 if
the "ENGINE OIL LEVEL – SWITCH ON IGNITION"
message appears.
The "ENGINE OIL LEVEL – MEASURING NOW"
message is displayed after approximately 3 seconds.
Technical
Index
data
Advertisement
Table of Contents
