Mercedes-Benz 2000 CL 500 Operator's Manual page 320

Mercedes-benz 2000 cl-class automobile operator's manual
Hide thumbs Also See for 2000 CL 500:
Table of Contents

Advertisement

Instruments
Operation
and controls
Malfunction and warning messages
ENGINE OIL LEVEL
Line 1
ENGINE OIL LEVEL
ENGINE OIL LEVEL
ENGINE OIL LEVEL
ENGINE OIL
ENGINE OIL LEVEL
* C = Category, see page 297.
1 The engine oil level must be checked immediately. See Engine oil
level indicator on page 154.
2 There is no oil in the engine. There is a danger of engine damage.
Instrument
Driving
cluster display
314
Line 2
C*
1
CHECK LEVEL!
2
2
STOP, ENGINE OFF!
1
3
REDUCE OIL LEVEL
2
4
VISIT WORKSHOP!
2
5
VISIT WORKSHOP!
2
Practical hints
Car care
3 There is a risk of damaging the engine or catalytic converter. The
engine oil level must be checked immediately. See Engine oil level
indicator on page 154.
4 The engine oil level has dropped to a critical level.
Check the engine oil level immediately. See Engine oil level
indicator on page 154 and check the engine for visible leakage
(loss of oil).
It may be that there is water in the engine oil. Have the engine oil
checked.
5 The measuring system is malfunctioning.
When the "ENGINE OIL LEVEL – CHECK LEVEL"
message appears while the engine is running and at
operating temperature, the engine oil level has dropped
to approximately the minimum mark on the dipstick.
When this occurs, the warning will first come on
intermittently and then stay on if the oil level drops
further.
If no oil leaks are noted, continue to drive to the nearest
service station where the engine oil should be topped to
the "full" mark on the dipstick with an approved oil.
The engine oil level warnings should not be ignored.
Extended driving with the symbol displayed could
result in serious engine damage that is not covered by
the Mercedes-Benz Limited Warranty.
Technical
Index
data

Advertisement

Table of Contents
loading

This manual is also suitable for:

2000 cl 55 amg2000 cl 6002000 cl-classCl

Table of Contents