Vcr To Tv Connection - Memorex MVR4042 Owner's Manual

VCR TO TV CONNECTION

After you have connected the antenna to the VCR, you must connect the VCR to the TV.
Below are 3 common methods of connecting your VCR to a TV. Find the type of TV you are using and follow the
connection diagram.
This VCR has a single 75 ohm output for connection to a TV. If your TV has separate VHF and UHF antenna inputs
(numbers 2 and 3 below), use a splitter to connect the VCR to the TV for VHF and UHF reception.
75 ohm Coaxial Cable (supplied)
Splitter
75 ohm Input
75/300 ohm outputs
75 ohm Coaxial Cable
(not supplied)
(supplied)
Splitter
75 ohm Input
300 ohm outputs
(not supplied)
75 ohm Coaxial Cable
(supplied)
4F90701A/E P08-13
TV
VHF/UHF IN
TV
UHF
VHF
TV
UHF
VHF
11
NOTE: If a VHF or UHF antenna
is used, set the TV/CATV
menu option to the "TV"
mode.
TV with single 75 ohm
VHF/UHF antenna input
NOTE: If a VHF or UHF antenna
is used, set the TV/CATV
menu option to the "TV"
mode.
TV with 300 ohm UHF
and 75 ohm VHF
antenna inputs
NOTE: If a VHF or UHF antenna
is used, set the TV/CATV
menu option to the "TV"
mode.
TV with 300 ohm UHF
and 300 ohm VHF
antenna inputs
20/03/2003, 10:32
11