Setting The Timer; Activating The Sleep Function - Memorex MX3720 Operating Instructions Manual

MX3720.O/M.QXD 4/30/02
OPERATING INSTRUCTIONS (CONTINUED)

SETTING THE TIMER

Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows :
1
1
With the power off, press the
SLEEP/TIMER button
"TIMER" blinks in the display.
Press and
MEMORY/PROGRAM/ CLOCK
SET button until timer hour
digits blink in the display.
The unit will revert back to standby mode one hour after the timer has been activated.

ACTIVATING THE SLEEP FUNCTION

Set the sleep timer as follows:
1
Press the POWER button to turn
the unit on and tune the desired
radio station or insert a CD as
previously instructed.
10:48 AM Page 15
2
2
Press
until SKIP/Search (
button to set the hour, then press
hold the the MEMORY/PROGRAM/
CLOCK SET button
minute digits will blink. Press the
Tuning/CD SKIP/Search (
or ( )
minutes,
MEMORY/PROGRAM/ CLOCK
SET button
2
Press the TIMER/SLEEP button
and "90" will appear and "SLEEP"
will blink in the display.
3
2
1
the Tuning/CD Within a couple seconds, "TIMER"
) or ( ) will light in the display to indicate
that the timer is set. When the
actual time matches the time set for
the Timer, the unit will turn on to the
again; the
last function (CD or tuner) used.
TO TURN THE TIMER OFF SO
)
IT IS NOT SET FOR THE NEXT
button to set the
DAY, press the TIMER/SLEEP
then press the
button again until "TIMER"
disappears from the display.
again.
3
Press the TIMER/SLEEP button a
second time to set the unit to turn
off
additional press with decrease the
sleep time by 10 minutes. After the
sleep time is set, you can press the
TIMER/SLEEP button at any time
to stop the Sleep function; "SLEEP"
will disappear from the display.
15
after 80 minutes. Each