Table of Contents
Advertisement
OPERATING INSTRUCTIONS (CONTINUED)
SETTING THE TIMER
Set the timer to turn the unit on and off to the Tuner or CD mode at a preset time as follows:
1
2
With the power off, press the
REPEAT/CLOCK button 1 and
then press the STOP ( )/TIME
SET/ POWER OFF button 2
within 5 seconds to enter the
Timer ON setting mode; "TIMER"
will appear and the hour will blink
on the display.
4
1
3
4
TO ACTIVATE THE TIMER ON MODE, with the unit off, press the EQ/TIMER button; "TIMER" will appear in
the display next to the current time. To cancel, press the EQ/TIMER button again; "TIMER" will disappear in
the display.
NOTES:
•
Before activating the timer, make sure the unit is in the Standby mode. Otherwise, there will not be sound
when the Timer's On time is reached.
•
Before activating the timer, make sure there is a disc inside the CD compartment when waking to a CD,
or make sure a AM/FM station is tuned before turning off the unit. Otherwise, there will not be sound
when the Timer's On time is reached.
•
When TIMER On time is reached, the unit will turn on for CD or Radio for 1 hour then turn off. If the CD
disc total tracks is below 1 hour, then the unit will playback all the tracks on the CD and then stop.
2
1
Press the ALARM/MODE/MEM+
button to select the desired wake
up function (CD or RADIO). Make
sure to insert a CD or tune a
station as desired before turning
the unit off.
Press the TIME/TUNING/SKIP/SEARCH o 1 or n 2 button to set the
timer On minute and then press the STOP ( )/TIME SET/POWER
OFF button 3 again; the timer will then be set. When the actual time
matches the Timer's On time, the unit will turn on to the function
2
selected in Step 2. To turn off the timer, press the EQ/TIMER button 4;
the unit will turn off.
3
Press
SEARCH/TIME o 1 or n 2 button
to set the timer On hour and then
press the STOP ( )/TIME SET/
POWER OFF button 3 again; the
minutes will blink.
15
1
2
3
4
the
TUNING/SKIP/
Advertisement
Table of Contents
