Setting The Timer; Activating The Sleep Function - Memorex MX4111 Operating Instructions Manual

MX4111.O/M.QXD 7/11/02
OPERATING INSTRUCTIONS (CONTINUED)

SETTING THE TIMER

Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows :
1
2
With the power off, press and
hold the TIMER/SLEEP button
(TIMER on the remote) until
"TIMER" blinks in the display.
Press and hold the MEMORY/
TIME SET button
hour digits blink in the display.
The unit will revert back to standby mode one hour after the timer has been activated.

ACTIVATING THE SLEEP FUNCTION

Set the sleep timer as follows:
1
Press the POWER ON/STANDBY
button to turn the unit on and tune
the desired radio station or insert a
CD as previously instructed.
4:06 PM Page 13
2
2
1
Press the TUNING/SKIP/Search
or
hour, then press the MEMORY/
TIME SET button
minute digits will blink. Press the
until timer
TUNING/SKIP/Search
button to set the minutes,
then press the MEMORY/TIME
SET button
2
Press the TIMER/SLEEP button
and "90" will appear and "SLEEP"
will blink in the display.
3
1 3
Within a few seconds, "TIMER" will
light in the display to indicate that
button to set the
the timer is set. When the actual
time matches the time set for the
again; the
Timer, the unit will turn on to the last
function (CD or tuner) used.
or
TO TURN THE TIMER OFF SO
IT IS NOT SET FOR THE NEXT
DAY, press and hold the
again.
TIMER/SLEEP button again until
"TIMER" disappears from the
display.
3
Press the TIMER/SLEEP button a
second time to set the unit to turn
off
additional press with decrease the
sleep time by 10 minutes. After the
sleep time is set, you can press the
TIMER/SLEEP button at any time
to stop the Sleep function; "SLEEP"
will disappear from the display.
13
after 80 minutes. Each