Memorex MX3720 Operating Instructions Manual page 15

MX3720.O/M.QXD 4/30/02
OPERATING INSTRUCTIONS (CONTINUED)
MAKING A TAPE RECORDING
The tape recorder in this system allows you to make direct recordings from the radio or CD player to a blank
cassette in the tape compartment. An automatic recording volume level control (ALC) circuit will automatically
control the volume level of your recordings to prevent distortion. You may change the settings of the volume
or the Stereo-Wide controls during a tape recording, as these controls have no effect on the material being
recorded onto the tape.
To make a tape recording, proceed as follows:
1
Open the Cassette Button
compartment and press the
STOP/EJECT button to open the
cassette compartment. Insert a
good quality blank cassette tape
and close the Cassette Door.
4
To avoid recording unwanted
material, such
commercials, use the PAUSE ( )
button to stop the recording
temporarily. Release the PAUSE
( ) button to begin recording
again.
10:48 AM Page 14
2
Press one of the Function buttons
(CD, TUNER or AUX), and
operate that function according to
its own instructions.
5
When you are finished recording,
as radio press the STOP/EJECT ( )
button to stop the tape.
3
When you are ready to begin
recording, press the RECORD ( )
button. The PLAY (❿) button will
also engage. The tape will begin
moving and all of the material from
your selected source will be
recorded on the tape.
6
If you wish to listen to your
recording immediately, press the
cassette REWIND (➛➛) button
until the tape rewinds to the
beginning, then press the STOP
( ) button
Function button
PLAY (❿) button
playback.
14
2
4
3
. Press the TAPE
and press the
to begin