Table of Contents
Advertisement
Information Item
LOW/MID/HIGH
10. MODE CHECK
Indication Area
S.GAIN
(STATUS:
DS.GAIN
Master gain,
USER SW GAIN)
(Cause of !LED
GAIN (0 dB)
GAIN (–3 dB)
illumination: displayed
DS.GAIN
full-screen)
SHUTTER
Indications selected
WHITE PRE.
through the menu option
EXTENDER
!LED are marked with
B.GAMMA
[ ! ].
MATRIX
Indications which may
COLOR COR.
activate the !LED are
FILTER
marked with [
].
(FUNCTION:
OUTPUT: MEM/CAM/OFF
TYPE: HD-SDI/SD-SDI/VBS
VIDEO OUT)
CHAR: ON/OFF
(FUNCTION:
OUTPUT: MEM/CAM/OFF
SELECT: VBS/VF/Y
MON OUT)
CHAR: ON/OFF
(FUNCTION:
TOTAL
P2CARD STATUS)
SLOT1/SLOT2/SLOT3/
SLOT4/SLOT5
OP-SLOT
(AUDIO: Enabling or
CH1: ON/OFF
disabling the FRONT
CH2: ON/OFF
AUDIO LEVEL
control)
(AUDIO: Phantom
FRONT: ON/OFF
REAR:
power status for the
microphone)
(AUDIO: Input signal
FRONT/W.L./REAR
CH1/2/3/4
and level for each
channel)
(CAC information:
CAC CONT: STOP
CAC MODE: AUTO/MANUAL
Operating status of
CAC)
--CONNECT LENS TYPE--
--SELECT FILE TYPE--
--CAC WARNING--
Indication
Value set for the master gain
–3 to 30
Example: LOW: 0
30/36
Gain value to which S.GAIN and DS.GAIN are assigned
6 : /10 : /12 : /
15 : /20 :
Gain status
Gain status
DS. GAIN value
Shutter status
White balance status
Extender status (EX2 or OFF)
BLACK GAMMA status (ON or OFF)
MATRIX status (A, B, or OFF)
Color correction status (ON or OFF)
Filter status
Position of OUTPUT SEL switch.
Setting for menu option VIDEO OUT switch.
Position of VIDEO OUT CHARACTER switch.
Position of OUTPUT SEL switch.
Signal mode set through the MONITOR OUT menu option.
The setting for menu option MONITOR OUT CHAR.
The options MONITOR OUT and MONITOR OUT CHAR can be found in
the OUTPUT SEL screen, which is accessible from the SYSTEM SETTING
page.
Total remaining free space/capacities of the P2 cards loaded in P2 Card
Slots 1 - 5.
Remaining free space/capacity of each card. The numbers denote the P2
card slot numbers.
The card status is indicated as:
ACTIVE/ACCESSING/INFO READING/FULL/PROTECTED/
NOT SUPPORTED/FORMAT ERROR/NO CARD/PROXY
For details of statuses, see [P2 CARD ACCESS LED and status of P2
cards] (page 31).
Indicates optional slot status.
The card status is indicated as:
PROXY/NO CARD/NOT SUPPORTED
If the FRONT AUDIO LEVEL control is in effect for Channel 1, then ON is
indicated. If not, OFF is indicated.
If the FRONT AUDIO LEVEL control is in effect for Channel 2, then ON is
indicated. If not, OFF is indicated.
Phantom power status of the front microphone
ON/OFF
Phantom power status of the rear microphone
For more information, see [MIC/AUDIO2] (page 187).
Input signal and level for each channel
The operating status of CAC is displayed.
Displays the operating mode for CAC
AUTO: CAC files are selected automatically.
MANUAL: A CAC file number is selected from the menu.
Displays the lens ID of the connected digital lens.
¢¢¢¢¢¢¢¢
Displays the file name of the currently operated CAC. However, when the
¢¢¢¢¢¢¢¢
MAINTENANCE page and CAC CONTROL on the CAC ADJ screen is set to
OFF, the CAC file currently selected is displayed.
Indicates that the CAC operation is in stop state.
Adjustments and Settings for Recording : Viewfinder Screen Status Displays
Status
73
Advertisement
Table of Contents
