Kurt DL640 Installation & Operation Manual page 17

REVISION A
JULY 1998
COPYRIGHT 1998 KURT MANUFACTURING
THIS DOCUMENT IS CONFIDENTIAL AND IS THE PROPERTY OF KURT
MANUFACTURING. IT MAY NOT BE COPIED OR REPRODUCED IN ANY WAY
WITHOUT THE EXPRESS WRITTEN CONSENT OF KURT MANUFACTURING.
KURT MANUFACTURING INTENDS TO AND IS MAINTAINING THE WORK AS
CONFIDENTIAL INFORMATION. KURT MANUFACTURING ALSO MAY SEEK
TO PROTECT THIS WORK AS AN UNPUBLISHED COPYRIGHT. IN THE EVENT
OF EITHER INADVERTENT OR DELIBERATE PUBLICATION, KURT
MANUFACTURING INTENDS TO ENFORCE ITS RIGHTS TO THIS WORK
UNDER THE COPYRIGHT LAWS AS A PUBLISHED WORK. THOSE HAVING
ACCESS TO THIS WORK MAY NOT COPY, USE OR DISCLOSE THE
INFORMATION IN THIS WORK UNLESS EXPRESSLY AUTHORIZED BY KURT
MANUFACTURING.
PLEASE READ AND OBSERVE THE FOLLOWING SAFETY PRECAUTIONS
FAILURE TO OBSERVE MAY CAUSE MINOR OR MODERATE PERSONAL
INJURY OR DAMAGE TO THE EQUIPMENT.
USE CAUTION WHEN HANDING CHIP GUARD MATERIAL. EDGES AND
CORNERS ARE SHARP AND MAY CAUSE PERSONAL INJURY IF NOT
REVISION HISTORY
FOUND THROUGHOUT THIS MANUAL.
CAUTION
CAUTION
HANDLED PROPERLY.