Rear License Plate Bracket R E P Lace M E N; Dead Weight Trailer Hitch R E P Lace M E N - GMC 1986 P-Truck Service Manual

186
$ Tighten
• Bolts to 41 N m (30 ft. lbs.).
4. Bumper to the vehicle.
• Place the inner braces into the inner brace
panel holes.
5. Inner braces to the cross sill with bolts (194).
Tighten
• Bolts to 41 N m (30 ft. lbs.).
6. Bumper to bracket bolts (196) and nuts.
• Nuts to 29 N m (21 ft. lbs.).
• Bracket to frame bolts to 68 N m (50 ft. lbs.).
7. Outer bracket to bumper bolts (196) and nuts
(192).
Tighten
• Nuts to 68 N m (50 ft. lbs.).
REAR LICENSE PLATE
BRACKET REPLACEMENT
Remove or Disconnect (Figure 24)
1. License plate bracket nuts and bolts.
2. License plate bracket.
Install or Connect (Figure 24)
1. License plate bracket.
2. License plate bracket nuts and bolts.
186. Outer Brace 192. Nut
187. Washer
188. Bolt
189. Bracket
190. Inner Brace
Figure 23—G-Rear Bumper Components
+ +
BUMPERS 2B-15
191. Bolt
193. Bolt
194. Bolt
195. Bumper Bar
196. Bolt
Tighten
• Nuts to 29 N m (21 ft. lbs.).
DEAD WEIGHT TRAILER
HITCH REPLACEMENT
Remove or Disconnect (Figure 25)
Hitch bracket to bumper bracket nuts, washers,
1.
and bolts.
2. Support to bumper nuts and bolts.
3. Hitch from the vehicle.
4. Chain bracket to bar assembly nut and bolt.
• Chain bracket.
• Support.
• Bar assembly.
5. Bar assembly to hitch bracket nut and bolt.
• Bar assembly.
• Shim(s).
• Hitch bracket.
Install or Connect (Figure 25)
1. Hitch bracket to the bumper brackets with bolts,
washers, and nuts.
Tighten
• Nuts to 24 N m (18 ft. lbs.).
2. Bar assembly with shims (as required) to the
hitch bracket with bolts and nuts.
• Assemble loosely.
3. Support to the bumper with bolts and nuts.
• Assemble loosely.
4. Bar assembly and chain bracket to the support
with a bolt and nut.
F-00110