GMC 1986 P-Truck Service Manual page 28

1. Control Arm Bushings and Ball Joints
2. Tie Rod Ends
3. Wheel Bearings
4. Steering Gear and Clutch Cross-Shaft
MAINTENANCE SCHEDULE AND LOG
The information shown on pages OB-7 through OB-18 is the same as shown in the 1986 Light Duty Mainte­
nance Schedule and Log.
This booklet covers the maintenance required for your General Motors
vehicle. It is essential that your vehicle receive this maintenance to
retain the safety, dependability, and emission control performance
originally built into your vehicle.
Maintenance service should be done by your General Motors
tru ck dealer or any other qualified autom otive service or repair
establishm ent which is able to provide such services and which
can be relied upon to use proper parts and practices.
In addition to the in-shop type services shown in Sections A and B,
this booklet also includes owner inspections and services in Section
C which you or a qualified technician should perform periodically.
Always keep this booklet in your vehicle, and leave it w ith the
vehicle when sold. The maintenance record, plus maintenance
receipts, may be needed fo r warranty repairs. It is suggested that
receipts be kept w ith this booklet.
MAINTENANCE AND LUBRICATION OB-7
5. Transmission Control Shaft
6. A ir Cleaner - Element
7. Transmission - Manual
Figure 9—Lubrication Points For The G Van
1986 GENERAL MOTORS
LIGHT DUTY TRUCK
MAINTENANCE SCHEDULES
8. Rear Axle
9. Oil Filter
10. Brake Master Cylinder
- Automatic
11. Parking Brake Linkage
F-00435