Clearing Misfeeds - Toshiba e-Studio 900 Operator's Manual

ZJBT060E
x Clearing Misfeeds x
x x
R CAUTION:
• The fusing section of this machine might be very hot. Caution should be tak-
en when removing misfed paper.
Important
When clearing misfeeds, do not turn off the operation switch or your copy
settings will be cleared.
To prevent misfeeds, do not leave any torn scraps of paper inside the ma-
chine.
If paper misfeeds occur repeatedly or you cannot remove the misfed paper in
spite of following the instructions, contact your service representative. You
might be requested to check the jam code number displayed in the upper part
of the screen.
Note
More than one misfeed area may be indicated. In this case, check every appli-
cable area. Refer to the following charts: A, B, C, D, U, P, Q, R (R1 – R6), V, Z
You can find a sticker explaining how to remove misfeed paper inside of the
front cover or inside of the finisher.
• Return the button under the toner bottle to
its original position.
• Close the toner cover.
ZJBH060E
x Clearing Misfeeds
113
7