Toshiba e-Studio 900 Operator's Manual page 76

Panel Off Timer
Set the amount of time the machine waits before switching the panel off after
copying has finished or the last operation is performed.
Note
Default: 1 minute
The warm up time for making a copy from standby mode is 5 seconds.
The interval time can be set from 10 seconds to 240 minutes using the
number keys.
System Auto Reset Timer
The System Auto Reset Timer setting automatically switches to the screen of
the function set in Function Priority. This happens if no operations are per-
formed or when an interrupted job is cleared. This setting sets the system re-
set interval. See p.62 "Function Priority".
Note
Default: 60 seconds
The time can be set from 10 to 999 seconds in 1 second increments using
the number keys.
Copier/Document Server Auto Reset Timer (Copier/Document Server)
Specifies the time to elapse before copier and Document Server functions are
reset.
Note
Default: 60 seconds
If "OFF" is selected, the machine will not automatically switch to the user
code entry screen, and you will not be able to restrict who uses the ma-
chine.
The time can be set from 10 to 999 seconds in 1 second increments using
the number keys.
Scanner Auto Reset Timer (Scanner)
Specifies the time to elapse before the scanner function is reset.
Note
Default: 60 seconds
If "OFF" is selected, the machine will not automatically switch to the user
code entry screen, and you will not be able to limit who uses the machine.
The time can be set from 10 to 999 seconds in 1 second increments using
the number keys.
Settings You Can Change with User Tools
5
67