Toshiba e-Studio 900 Operator's Manual page 169

Specification
When you want to copy onto translucent paper or paper lighter than 20 lbs,
80 g/m
might cause a paper jam, marked edges or the paper edges to be folded.
1.
Direction of paper grain
2.
How to set the copy paper in the
paper tray
If you want to set 20 lbs, 80g/m
the following illustration.
10
1.
Direction of paper grain
2.
How to set the copy paper in the
paper tray
If you load recycled or special paper in the paper trays and use the Tray Paper
Settings, this function is not available with these trays unless their settings are
identical.
Feeding B5K, A5K, or 8
marked edge or a misfeed. In this case, change the orientation or turn over the
paper stack in the paper tray.
160
2
, set the paper as shown in the following illustration. Not doing so
1
/
2
or heavier paper, set the paper as shown in
" × 5
1
/ "K paper into the machine might cause a
2 2