Table of Contents
Advertisement
LE/LE-HC Series DVR User Manual
V1.4
Chapter 6: Using and Configuring the LE/LE-HC Series DVR in GUI
mode
GUI mode involves the use of a Graphic User Interface and a mouse. A mouse is included in the
system. Whichever method is used to configure the DVR, all configuration options are available in
all methods.
Figure 6.1
Figure 6.1 shows the standard GUI display screen in live video display mode. The large labeled
areas in Figure 6.1 are explained below:
DVR basic information: includes date, time, total hard disk size and LAN status.
Camera status: Three columns of square indicators (R-Regular, M –Motion, G-Alarm input)
beside each camera indicate the recording status, by color:
Color
Recording Mode
Gray
No video signal
Blue
No recording
Red
Full recording
Full screen monitoring / Live surveillance:
R
Color
Status of each DI and DO device.
Gray
DI or DO not detected
Red
DI or DO was detected
- 36 -
M
Color
Motion detection Status
Gray
Motion not detected
Yellow
Motion detected
G
October 2006
DVR basic
information
Camera status
Playback
System configuration
Full screen monitoring /
Live surveillance
Advertisement
Table of Contents
