Advertisement
4. PTZ Control: The PTZ control is used to control connected and
configured PTZ cameras.
Relays (on/off): Relay Toggle (For PTZs using relays).
Wipers (on/off): If using the PTZ cameras corresponding wiper control relay, this toggles
the relay/wiper on and off (For PTZs with a wiper).
Zoom: Controls the zoom function of the PTZ camera.
Focus: Overrides the auto-focus setting of the PTZ camera, allowing the user to further
focus the image.
Iris: Overrides the PTZ camera's auto iris control, allowing the user to brighten/darken the
image.
Speed Dome: Operates the speed dome, including Preset Setup, Preset Call and Preset
Tour.
5. Network Panel: The Network Panel displays the current network settings of the RP Series system. This al-
lows the user to easily view the DVR/NVR's IP address, which is required for remote viewing and to view any
users who are currently connected.
6. Matrix & Display: Matrix DSP Boards are optional video processors that install in separate
PCI slots in the system. Each board provides 2 Composite Video Out ports and 2 Audio Out
ports. Multiple camera display configurations including camera switching by window are
configurable in setup and can be saved as Groups.
Selecting a particular number from the "Matrix Group" buttons will display the associated
arrangement of cameras (as defined in the group setup) to the video out ports of the matrix
card.
Selecting a particular number from the "Display Group" buttons will display the associated
arrangement of cameras on the main VGA monitor.
4
RP Series - Main Window Layout
PTZ Directional Controls: By
pressing and holding these buttons,
the PTZ camera can be moved left,
right, up and down.
Auto Pan: When using a
supported camera, pressing this
button initiates an automatic tour
0
of 360
by the connected PTZ
camera.
Advertisement
