K) System Information; L) Date/Time; M) Alarm - Sentry LE Series Manual

Table of Contents

Advertisement

LE/LE-HC Series DVR User Manual
V1.4

k) System Information

This option shows basic level information on
the LE/LE-HC Series DVR. This information
screen may be required by a service technician
or network administrator.

l) Date/Time

Allows the date and time to be set, including
Time Zone selection.

m) Alarm

Multiple Alarm input types can be setup along with
the necessary Actions to be taken when these Alarms
are triggered.
Motion Detection
See section on Motion Detection
setup under Record Setup.
E-Mail
An external dial-up modem must
be connected to either COM1 or
COM2 and correctly configured.
Complete the Recipient Address and Name and Sender Name, along with a Password if
desired. A Test item is included.
Video Popup
If it is desired that Video Popup (full screen display of the alarmed camera) on Alarm
detection, set the length of the Popup in seconds.
Set Action
Set what action is to take place for various alarm types, by camera.
Alarm types are: Motion Detection, Video Lost, Disk Space low, Disk Error.
Figure 5.16
E-Mail On/Off
When turned On, Start and Stop times for this activation must be entered. In addition, a Recipient
and Subject must be entered along with an optional Text Message. Cameras are selected for
snapshot inclusion with the email with an On/Off select.
Video Popup
When turned On, Start and Stop times for this activation must be entered.
Action types are:
Message On/Off
When turned On, Start and Stop times for this
activation must be entered.
Beep On/Off
When turned On, Start and Stop times for this
activation must be entered.
- 28 -
Figure 5.13
Figure 5.14
Figure 5.15
October 2006

Advertisement

Table of Contents
loading

This manual is also suitable for:

Le-hc series

Table of Contents