Table of Contents
Advertisement
LE/LE-HC Series DVR User Manual
V1.4
Figure 4.18
Save:
Save the data file on the local machine.
Snapshot:
Clicking this button brings up a list of Cameras. Select the camera from the
list to snapshot, and then click o.k. It will then bring up a Webpage with the
picture in it, which may be saved by right clicking on the image and selecting
"Save Image As".
Play:
Play video.
Step Forward:
When the pause button is pressed, "Step Forward" will move each camera
forward one frame.
Stop:
Stop video playing.
Data Type:
When data is selected, all recorded video will be played. Selecting motion will
only play video that was recorded based on motion. GPI will play video that
was recorded by an alarm trigger
Seek:
Allows specific times to be entered and the video will zoom to that time.
Speed:
Playback speed
Use the slider bar above this image to move around
within the time selected. Please note that using the
slider bar or the seek option will cause a delay of
several seconds while the video switches.
n) Send Mail
The mail settings configuration page (Figure 4.19) is
used to alert configured email recipients when specific
events occur on the LE/LE-HC Series DVR.
As many Motion Detect Types (Events) as cameras can trigger an email and an be set for each
camera over a specific time range. Each event must be enabled to send emails. Enable them by
using the pull down menu "Enable" and select enable. Enter appropriate data into the From, To,
Figure 4.19
- 19 -
October 2006
Advertisement
Table of Contents
