B) Operating The Menus And Changing The Setting Parameters; C) View The Previous/Next Page; D) Exit The Menus; E) Video Recording Setup - Sentry LE Series Manual

LE/LE-HC Series DVR User Manual
V1.4 October 2006

b) Operating the Menus and changing the Setting Parameters

Users can select the Setting values by pressing the
Up/Down buttons and change the Setting value by
pressing the Left/Right buttons. Press "OK" to save the
Setting value or press "Cancel" to cancel the Setting and
go back to the previous level Setting Menu.
Figure 5.2
In some cases, users also need to key in alpha characters via IR remote control. Press the
"Keypad" button to bring up a virtual keyboard. Select the required characters then press "OK" to
save the setting value or press "Cancel" to cancel the setting and go back to the previous level
setting menu. For numeric characters, use the number buttons near the bottom of the remote.
Pressing the "Enter" button will save the number into the system and move on to the next number.

c) View the Previous/Next Page

In a "Setting" menu, users can press the Prev/Next Page buttons to skip to the previous or the
next page in the setting menu.

d) Exit the Menus

After changing the setting values, users can press "OK" to save the settings or press "Cancel" to
cancel the settings and go back to the previous level setting menu. Or press the "Menu" button to
go back to the system setup menu directly.

e) Video Recording Setup

Press "Menu" and select "Record Setup". Select "Record Schedule" and press "OK" or "Right"
button to enter the record schedule list of the LE/LE-HC Series setting.
Ensure that at least one recording schedule is set up or no recording will occur.
- 22 -