C) Video Input - Sentry LE Series Manual

LE/LE-HC Series DVR User Manual
V1.4
PTZ Control
Note:
Click the "OK" button to save the configuration. Pressing "Cancel" or turning off the machine will
result in loss of the updated configuration

c) Video Input

Use Video Input to arrange the display window order in
which cameras appear. This system is unique in that
any camera can be assigned to any position. Use the
left/right arrow keys to set/change the display window
number alongside each camera number.
Allows control of the PTZ camera using the remote control. Press the
OK or right arrow button. The Pan/Tilt control screen will appear
showing P/T Control can be accomplished with the Up/Down/Left/Right
arrow buttons.
Press the Next (Page) button for the Zoom control screen. The
Up/Down buttons will now control Zoom
Press Next button for Focus. Use Up/Down buttons to set.
Press Next button for Speed. Use Right/Left button to choose.
Press Next button for "Call Preset". Use a Number key to move the
camera to a Preset from 1 to 9.
Press Next button for "Set Preset". Use a Number key to set the
camera's present position, zoom and focus as a Preset from 1 to 9 (
move camera to desired position/zoom first).
Controlling a PTZ camera with the remote is very cumbersome. Far
better to use the DVR in GUI mode and control the PTZ with a mouse.
- 25 -
October 2006
Figure 5.7