Table of Contents
Advertisement
LE/LE-HC Series DVR User Manual
V1.4
System Setup (Configuration) in IR Mode
Selecting "System Setup" from the main menu will bring
up the System Setup Menu displayed in Figure 5.3. Use
the "Up/Down" arrows and the "Enter" or the "Right"
button to select. Each of these options, are discussed
below:
a) Password Protect
Setting a password protects the system from
unauthorized access and unauthorized changes. This
function must be enabled to secure the LE/LE-HC
Series DVR with passwords.
*** WARNING*** Setting passwords on the LE/LE-HC
Series DVR requires that the user remember the
password, as we cannot retrieve the password. A complete system reset will be required to reset
the password.
b) Video
These settings are "per camera". Use the Next Page button to
advance to the next camera to be Setup.
Standard "AUTO", the LE/LE-HC Series will detect the type of
video input to this channel automatically. The DVR can also
be set to "NTSC", "PAL" or "SECAM". NTSC is the standard
used in North America.
Brightness: The higher the value, the brighter the video (applied to current camera)
Contrast:
The higher value, the stronger contrast (applied to current camera)
Saturation:
The higher value, the more color saturation (applied to current camera)
Hue:
The higher value, the higher hue (applied to current camera)
Quality:
Higher value, better video quality but larger recorded frame size (applied to all
cameras).
Higher numbers for quality decrease the compression but increase the file size, thus decreasing
storage time and slowing frame rates for remote transmission.
Figure 5.4
- 23 -
October 2006
Figure 5.3
Figure 5.5
Advertisement
Table of Contents
