Chapter 7: Using Ptz Cameras In Ir Mode - Sentry LE Series Manual

Table of Contents

Advertisement

LE/LE-HC Series DVR User Manual
V1.4

Chapter 7: Using PTZ Cameras in IR Mode

Configuration of PTZ Cameras in IR Mode is covered on Page 25 under d) PTZ Setup.
In full screen (IR Controller) mode, PTZ Controls are presented in 6 pages. Each page is defined
below:
First page
Direction control. Use "Up", "Down", "Left" and "Right" button to make the
camera move in the direction clicked. Press "OK" to save the values or press
"Cancel" to go back to the previous menu. Press "Next" to enter the next
page of PTZ camera control functions.
Second page
Zoom in / Zoom out control. Use "Up" and "Down" keys to zoom in or zoom
out. Press "Prev" or "Next" button to change pages.
Third page
Focus control. Use "Up" and "Down" buttons to adjust focus. Press "Prev" or
"Next" button to change pages.
Fourth page
Movement speed control. Press "Left" and "Right" button to adjust the
camera Pan and Tilt speeds. Press "Prev" or "Next" button to change pages.
Fifth page
Preset Position recall. Press Numeric key 1 to 6 to recall the camera to the
preset position saved in memory. Press "Prev" or "Next" button to change
pages.
Sixth page
Preset position set up. Use "Up", "Down", "Left" and "Right" arrow keys to
move the camera to the desired position and then press a numeric key 1 thru'
6 to save this Camera preset.
- 61 -
October 2006

Advertisement

Table of Contents
loading

This manual is also suitable for:

Le-hc series

Table of Contents