Precor TRM 800 Series Assembling And Maintaining Manual page 65

Treadmill Safety Features
If the restart switch trips during exercise, perform the
following steps:
1.
2. Press the restart switch down until it clicks, returning it to
3. Start the workout from the beginning, reducing the time
Figure 39: Attaching the safety clip
Tip: The small, flexible tab underneath the restart switch is
designed for storage of the safety clip. When the treadmill is
not in use, attach the safety clip to the tab as shown in the
following figure.
Figure 40: Safety clip storage
Reattach the safety clip if necessary.
its normal position.
Note: If the restart switch trips, all information about the
current workout is deleted.
as needed to account for the amount of exercise that has
been completed.
63