Testing Safety Features - Precor TRM 800 Series Assembling And Maintaining Manual

50

Testing Safety Features

Before any exerciser uses the treadmill, verify that the stop
switch, the STOP button, and the Auto Stop feature are all
working correctly.
To test the restart switch:
1.
2. Give the safety clip lanyard a slight tug. The restart switch
3. Press the restart switch back into its normal position. The
To test the STOP button:
1.
2. Press the STOP button once. The console should show
3. Press the STOP button again. The console should show a
4. Press the STOP button a third time. The console should
To test the Auto Stop feature:
1.
2. Wait two minutes without stepping onto the running belt.
Assembling and Maintaining TRM 800-Series Treadmills
Start any workout on the treadmill.
should pop up and the treadmill should slow to a stop
immediately.
console should reset itself and return to the Welcome
screen or banner.
Start any workout on the treadmill.
that the workout is paused.
workout summary.
return to the Welcome screen or banner.
Start any workout on the treadmill, but do not step onto
the running belt.
At this point or shortly beforehand, the treadmill should
slow to a stop and the console should ask the user to
confirm that he or she is still present. If there is no
confirmation, the console should return to the Welcome
screen or banner.