2U Rack Bezel - HP ProLiant DL560 Gen8 Maintenance And Service Manual

If any full-length expansion boards are installed, do one of the following:
5.
Remove the primary PCIe riser cage
o
Remove the secondary PCIe riser cage
o
Remove the air baffle.
6.
To replace the component, reverse the removal procedure.

2U rack bezel

To remove the component:
Unlock the 2U rack bezel, press the latch on the 2U rack bezel, and then remove the 2U rack bezel.
To replace the component, reverse the removal procedure.
("PCIe riser cage (primary)" on page 31)
("PCIe riser cage (secondary)" on page 32)
Removal and replacement procedures 30