HP ProLiant DL560 Gen8 Maintenance And Service Manual page 58

Remove the access panel
5.
Remove the air baffle
6.
Remove the PCIe riser cage
7.
If installed, remove the secondary PCIe riser cage
8.
If installed, remove the FBWC capacitor pack
9.
43).
If installed, remove the cache module
10.
Remove the FlexibleLOM ("FlexibleLOM" on page 38).
11.
Remove all DIMMs ("DIMMs" on page 55).
12.
Remove the power supply backplane
13.
Disconnect all cables connected to the system board.
14.
Remove the heatsink ("Heatsink" on page 48).
15.
Remove the processor ("Processor" on page 51).
16.
Loosen the system board thumbscrews.
17.
Remove the system board, using the handle to lift it out of the chassis.
18.
("Access panel" on page 29).
("Air baffle" on page 29).
("PCIe riser cage (primary)" on page 31).
("Flash-backed write cache
("Power supply
("PCIe riser cage (secondary)" on page 32).
("Flash-backed write cache capacitor
module" on page 41).
backplane" on page 36).
Removal and replacement procedures 58
pack" on page