ADJ PINPOINT GO TW User Instructions page 7

PinPoint GO TW
The ADJ LED RC3 infrared remote (Sold Separately) has many dif-
fernet functions and gives you complete control of your PinPoint GO
TW. To control the your desired fixture you must aim the controller at
the front of the fixture and be no more the 30 feet away.
BLACKOUT - Pressing this button will blackout the fixture. This but-
ton is also used to switch between normal mode and energy saving
mode. Press the button for at least five seconds, when the Amber
LED flashes for five seconds you are in energy saving mode, when
the cool white LED flashes two times you are in normal mode.
SELECT PROG (PROGRAM) - Press this button scroll through slow
color fade, fast color fade, slow color change, and fast color change.
Press the Speed button and use the +" & "-" buttons to adjust the
program speed. Press the Flash button to activate strobing and use
the +" & "-" buttons to adjust the strobe speed.
MANUAL COLOR MODE - Press the WW/CW/A buttons to select
one of the three colors. Use the "+" & "-" buttons to adjust the output
intensity. Press the Flash button to activate strobing and use the +" &
"-" buttons to adjust the strobe speed.
COLOR SELECT MODE - Press the "1" button to activate color se-
lect mode. Use the "+" & "-" buttons to scroll through the 12 color
temperatures of the Color Temperature Chart. Press the Flash button
to activate strobing and use the +" & "-" buttons to adjust the strobe
speed.
ADJ Products, LLC - www.adj.com - PinPoint GO TW User Manual Page 9
ADJ LED RC3 Remote PinPoint GO TW
2.5 Do Not Expose the Battery to water or liquids
Never soak/drop the batteries in liquids such as water, seawater,
drinks such as soft drinks, juices, coffee or other.
2.6 Battery Replacement
For battery replacement please contact ADJ customer support (800)
322-6337.
2.7 Do Not use a damaged Battery
The battery could be damaged during shipping, caused by shock.
Should the battery be found damaged, including damages to the
plastic casing of the battery, deformation of the battery package,
smelling of an electrolyte, or leakage of the electrolyte gel, or other,
DO NOT use the battery. A battery with a odor of electrolyte or a gel
leakage should be placed away from fire to avoid fire or explosion.
3. Battery Storage
When storing the battery, it should be stored at room temperature,
with a charge of at least 50%. We recommend that during long peri-
ods of storage that the battery be charged every 6 months. Doing
this will prolong the life of the battery and will also make sure that the
battery charge does not fall below the 30% mark.
4. Other Chemical Reaction
Because batteries utilize a chemical reaction, battery performance
will deteriorate over time even if stored for a long period of time
without being used. In addition, if the various usage conditions such
as charge, discharge, ambient temperature, etc. are not maintained
within the specified ranges, the life expectancy of the battery maybe
shortened or the device in which the battery is used may be damaged
by electrolyte gel leakage. If the batteries cannot maintain a charge
for long periods of time, even when they are charged correctly, this
may indicate it is time to change the battery.
5. Battery Disposal
Please dispose of battery according to local regulations.
ADJ Products, LLC - www.adj.com - PinPoint GO TW User Manual Page 6
Battery Precautions